Cassette plants for the production of wall panels
- Customer pickup,
- In detail
For the production of the main product range, the PBS cassette machine is equipped with a set of stationary end plates and a base. The base is adjustable in height. If it is necessary to produce a different range of products, the cassette machine can be equipped with additional board equipment and openings.
1. Heating by steam.
The movement of the outer frames and shirts of the cassette machine along the guides is carried out mechanically using a key. In the cassette machine, the PBS engineers have implemented a concrete heating system using steam. The system includes the ability to adjust the temperature at different production stations. This makes it possible to significantly increase the speed of production of products. Also, the heating system can be implemented using hot water, which is supplied to the coil. To increase the usable area, the coil is ribbed.
The cassette machine is equipped with four hydraulic cylinders, they allow to ensure tight closing of the compartments. The hydraulic cylinder has the ability to rotate, for the smooth removal of products from the central compartments. Height adjustment of the lower board is carried out using a special screw.
The cassette machine implements a system of concrete vibration compaction using external Brecon vibrators. In the process of forming products, a section - by - section concrete compaction is provided. The vibration compaction system is controlled by a distributor. There is also a display for indicating the frequency.
2. Heating with working fluid.
For unimpeded removal of products from the cassette machine, the rod has the ability to fold. The sides of the cassette machine have a rubber seal, it prevents the flow of concrete milk. The end boards are unfolded by rotation. If there are embedded elements at the ends of the product, special grooves are provided in the board.